Products > Hardware - Pins > SP113 Close Tolerance Shear Pins
These close tolerance pins are ordered by the part number SP113 followed by a letter from the chart below to denote a size and then a number to denote the length from under the head to the start of the split pin hole in tenths of an inch.

For example SP113/A5 is a 1/8” dia pin with a length of 1/2” from under the head to the start of the split pin hole.

Pins are also available in half measurements, for example part number SP113-A5-1/2 has a length of 0.55”.
Size CodeDiaSplit Pin to SuitWasher to suitNotes
-A1/8”SP90-C2SP122-BLoose Fit
-B5/32”SP90-C3SP122-C
-C3/16”SP122-D-
-X0.1898”
-E1/4”SP90-C4SP122-E
-G5/16”--
Result Page: 1 2 Next