Products > Electrical
Aerobatic Batteries

For aerobatic batteries we use Concorde VRSLAB “RG” (recombinant gas) batteries. These are not gell batteries but are similar to the modern sealed car battery and they work better on high...

AMP Flexi-Block Modular Terminal Block System

Assemble terminal blocks to custom requirements in seconds: 1. Pull out the number of block assemblies required from the dispenser box. 2. Cut the track with a hacksaw or cutting tool two spaces longer...

Batteries

We stock Gill aircraft batteries which are used by more aircraft manufacturers than any other brand.

Battery Electrolyte

Battery grade sulphuric acid in sealed plastic bottle with self-contained pouring spout. Specific Gravity: 1.285. Detailed safety and disposal instructions on container. Sold per US quart. G35 requires...

Butt-Type Splices

CAA Approved Electrical Cable

22 awg is suitable for navigation lights and other low power uses, 16 awg is more suitable for landing lights etc, all cable is sold by the metre. For starters and batteries 4 awg is often used.

Chipmunk Bulbs

Cockpit Lights

Type C4A - A multi-purpose light providing narrow spotlight or floodlight beam. Rotate dial for red or white lens. Push button for instant full light. Adjustable rheostat. Coiled cord and nap in mounting...

Electrical Terminal Boots

External Power Receptacle

This unit is designed to mount in a hole in the skin which is then covered with hinged access door (not included). Mates with AN2551 and 11-03158 type plugs,

Flat Copper Braid

Used for bonding throughout the airframe, 2.5 mm wide by 0.4 mm thick, equivalent to the old AVC15. Supplied on 25 metre reels.

Fuses and Fuse Holders

Glass enclosed dual filament fuses, sold individually.

GE Lamps

Heat Shrink Products

Jumper Plug

Standard 3-pin female plug equivalent to AN2551 plug. Red Lexan construction is virtually unbreakable and screws together in minutes. Sleeves are solid copper, silver plated. Mates with AN2552-3A external...

Klixon Circuit Breakers

Small, modern and light weight, economy, push-pull circuit breakers designed for applications that do not require the tighter performance characteristics of military specification circuit breakers.

Knife Disconnects

Larger Terminals For Batteries

Low Voltage Warning Lights

These indicators are designed to give a flashing indication in the event of an alternator/generator failure resulting in the battery supplying power to the bus bar. The thresholds for illumination are:-...

Navigation Lights and Accessories

Nulites Instrument Lights

Replace your existing system of post light using the latest technology. The NULITE uses dual incandescent bulbs with a rated life of 10,000 hours in a translucent material designed to look like an internally...

Panel Light Dimmer

These high quality rheostats are used in production aircraft to dim instrument panel lights. Size 1-9/16” diameter, mounts in a 3/8” dia. panel hole. Shaft is 1/4” dia. with a flat for...

Permit Quality Switches

For permit use only (not CAA approved).

Potter & Brumfield Circuit Breakers

Press To Transmit Switch

Used on the Islander as the press to transmit switch on the control yoke.

Screened Cable

Metal braided screened cable, sold by the metre. Suitable for magneto switches etc.

Self Locking Cable Ty-Wraps

Solenoids (Relays)

We keep a small range of solenoids in stock, details as below:

Spiral Wrap

Clear wrap-around spiral wrap ideal for bundling electrical cables together .

Terminals

Toggle Switches

These aerospace quality switches have been the industry standard for many years. The “TL” series have a silicone sealant to prevent the entry of moisture or dust, case is fabricated from arc-resistant...

Warning Lamps

A range of sub-miniature filament indicators which have an approximate life of 5,000 hours, each indicator comes complete with a short length of cable. Construction consists of a moulded polycarbonate...

Waxed Linen Cord

Waxed cord used for whipping the end of electrical cables. Supplied on 0.5 kilo spool

Whelen Post Lights

New manufacture post lights for illuminating instrument face. The 1” long 8/32” threaded shank serves as an instrument mounting screw, terminal on end of shank mates with threaded connector...