SL215-3-1SP3 has a slightly floating nut.

Limited stocks of K1000-2BA fixed anchor nut and F5000-2BA floating anchor nut. Style is as per MS21047 and MS21059.

UNC/UNF, cadmium plated steel, full size.

UNC/UNF, cadmium plated steel, thin.

UNC/UNF, corrosion resistant plated steel, full size.

UNC/UNF corrosion resistant steel, cadmium plated, thin.

UNC/UNF alum alloy, dyed blue, full size.

UNC/UNF alum alloy, dyed blue, thin.

UNC/UNF brass, tinned, full size.

UNC/UNF brass, tinned, thin.

UNC/UNF steel, cadmium plated, full size, double lug anchor nut.

UNC/UNF steel, cadmium plated, thin, double lug anchor nut.

BA/BSF, plain full size, self locking nut.

BA/BSF, plain thin, self locking nut.

BA/BSF, double lug, anchor nut.

BA/BSF, double lug, thin, anchor nut.

BA/BSF, double lug, floating anchor nut.

BA/BSF, double lug, thin floating anchor nut.

BA/BSF, single lug anchor nut with double rivet fixing.

BA/BSF, single lug thin anchor nut with double rivet fixing.

Steel, cadmium plated QQ-P-416A, Type II, Class 3 these rugged plain hex nuts can carry the same high tension load as AN310. It requires a locking device such as a check nut or lock washer. Order by part...

These nuts can carry half the load of an AN315 nut. They are used as a locking device for plain nuts, screws, rod ends etc. Order by part number AN316 followed by size code and “L” or “R”...

Coarse thread.

To order a BA/BSF nut choose the main part number and then add a letter from the size chart followed by another letter to denote the style. For example: A27/CS is a plated steel, 2BA, slotted nut. Please...

For fuel tanks.

There are 2 ranges of British stiffnuts, those with BA/BSF thread (AGS2001 - AGS2019) and those with UNC/UNF thread (A125 - A137). “AGS” series BA/BSF stiffnuts are ordered by the main part...

Miniature floating right angle anchor nuts.

Manufactured to standard castle nut specification, but with a nylon insert for added safety, should the split pin be overlooked the nylon insert will act as a stop nut.

Manufactured to standard castle nut specification, but with a nylon insert for added safety, should the split pin be overlooked the nylon insert will act as a stop nut.

Cadmium plated finish with dry film lubricant applied. Alternative to AS8601, H10, NAS679.

Cadmium plated finish with dry film lubricant applied. Alternative to AS8600, H14-L.

Replaces AN365 and MS20365. Also available in stainless steel, order MS21044-C instead of MS21044-N

Replaces AN363.

Cadmium plated finish with dry film lubricant applied. Alternative to AS8602, K1000

Cadmium plated finish with dry film lubricant applied. Rivet holes in line. Alternative to K2000.

Cadmium plated finish with dry film lubricant applied. Alternative to K3000.

Cadmium plated finish with dry film lubricant applied. Alternative to AS8609, F5000.

Cadmium plated finish with dry film lubricant applied. Alternative to AS8603, MK1000, NAS697.

Cadmium plated finish with dry film lubricant applied. Alternative to MF5000.

On older American aircraft these “beefier” style anchor nuts were often used.

Alternative to AN364 and MS20364.

These nuts replace A356 pal nuts, they are stamped from 1050 spring steel and cadmium plated.

Ideal for installations where it is difficult to reach the back of instruments. Instrument thickness is the length the legs of the nuts will cope with. 6-32 thread.

This all metal fitting with a 6/32 thread works like a Rawl Nut and is ideal where access to the back of the panel is not possible.

Rivnuts are an internally threaded tubular aluminium rivet that can be pulled up with a rivnut tool from one side only (like a pop rivet).

Image shows Anchor, Flat and U types (left to right).

To order a UNC/UNF nut choose the main part number and then add a letter from the size chart followed by another letter to denote the style. For example: A105/GS is a stainless steel, 5/16” UNF,...

Available in British (AGS) or American (AN) specification.