Specialist solvent (ideal for use with 1300L adhesive) for cleaning or removing neoprene and SBR adhesives, coatings or sealants.

Used on metal surfaces adjacent to the battery to prevent corrosion, may also be used on the bottom of aluminium floats to protect them from marine growth. Sold in US quarts.

We all know the problems of using aerosols for a prolonged time, your finger aches, your hand can get cold if spraying a solvent, or even worse your skin can be very near the contents. This accessory...

Can be applied to either metal or fabric (providing you have been using nitrate dopes). We keep cockpit green in stock, other colours are available on request.

Cleaning solvent specially formulated to meet the particular requirements of aircraft painting. CN44 will cope with a wide range of surface contaminants, including water soluble dirt, resinous contamination,...

CA8000 is a VOC compliant chemically cured polyurethane top coat used to protect the exterior of aircraft from Jumbos to a small Cessna! We suggest it is applied over PAC33CF primer. CA8000 is produced...

Engine paints available in either US quarts or one litre cans depending on manufacturer.

This state of the art, off-white (dope proof) epoxy primer exhibits outstanding adhesion and corrosion protection on substrates such as aluminium, composites, fibreglass, wood and steel. It provides an...

PR143 is a yellow, two part mix, waterproof paint which satisfies specifications DTD5567A, DTD5555A, DTD5580A and DTD5599A. When applying over PR30B etch primer allow this to dry for one hour before overcoating....

This is a two pack, waterproof paint which satisfies specifications DTD899A, DTD5555A and ASWE22763. It is an ideal primer for both steel and aluminium and is an excellent base for epoxy primers. Mix...

This set comprises the following items:- 1 New Eurmask 2 active carbon filters(A1/P2) 10 pre-filters for spray painting

A blend of deep cutting solvents which penetrate the dope finish and restore some of the original flexibility. Your old fabric must be in good condition, specify whether butyrate or nitrate rejuvenator...

We stock Edel and Mondiolac Delta Aerospace French aerosols. Both supply the large 400ml aerosols and have a good reputation for supplying a quality product. Edel aerosols are in accordance with specs...

For adding to clear dope to make your own fungicide or aluminium dopes. Sold in 1 lb. cans

High quality aerosols at a more sensible price! Please note that they are not a colour match with the french aerosol range.

Deoxidine 624 is a liquid cleaner, for use by brush or dipping, on aluminium and its alloys to remove oils and oxides prior to using Alocrom 1200. Supplied in either 1 or 5 litre containers. Alocrom 1200...

Nitrate dopes are more flammable than butyrate dopes but they do “stick” far better than butyrate dopes, in fact most cellulose based cements are nitrate based. The normal practice is to start...

Before any paint is removed from it’s original container it must be stirred thoroughly so that any pigment which may have settled on the bottom is brought into suspension again and distributed evenly...

Dasic D23V has been formulated to give the highest possible efficiency in the removal of chemical resistant epoxy and polyurethane paint schemes used, whilst being suitable for use on all conventional...

A green, epoxy, dope proof primer with all the characteristics of Epibond except the colour is a traditional aircraft dark green. The primer is supplied in a kit of 2½ US quarts (just over 2 litres)...

This primer is formulated for the first one or two coats on synthetic Dacron/Polyester type fabrics after proper heat tautening, to ensure excellent adhesion and proper fibre encapsulation to the substrate...

Randolph colours are available in Butyrate Dope, Polyurethane (Ranthane) and as an Enamel. All paints are mixed to order in house meaning you always get fresh stock. There are 50 “standard”...

Blushing on the surface is one of the common problems arising when dope is applied in conditions of high humidity. Retarder is a slow drying solvent which may be added to nitrate or butyrate dope to slow...

Commercial, grey, single pack etch primer supplied in a small 150 ml aerosol by Phoenix Precision.

Two specialist aerosols from Indestructible Paints.

Black or grey wing walk compound has a special grit mixed into a tough enamel material, used to form non-slip surfaces on aircraft wings and steps. Thoroughly clean the surface and remove any gloss before...

A unique aerosol which produces a low sheen wrinkled black enamel. Simply follow the detailed instructions on the back of the can and the wrinkle pattern will begin to appear, no other expensive equipment...

Although by modern standards this primer has been replaced by the latest two part mix epoxy paints, it is still very popular due to the convenience and ease of application from an aerosol can. It is an...