Bolts are ordered by the part number followed by a dash letter to denote the total length from under the head to the end of the bolt. AGS798 and 799 are only available in size D onwards. For example:...

These collars are manufactured in plated steel. Ask for AGS674 if aluminium is required. Add the size number to the part number, e.g. AGS899-4 is a collar for a 1/4” pin.

Pins are ordered by the part number AGS1551 followed by a dash number to denote the size.

The first section of the part number is either MS20392 or the earlier AN number which will denote diameter. The second section of the part number denotes the length from under the head to the start of...

2” long, made in 14swg

Positive locking pins that can readily be used without the aid of tools. Made of spring steel, cadmium plated, 1-1/16” long. Look like AGS1551 series.

Bolts are ordered by the part number followed by a dash number which denotes the total length (including thread) in eighths of an inch. If the dash number is two digits the first number denotes whole...

These blind fixing bolts are used in numerous aircraft, they are ordered by the part number followed by two numbers denoting the diameter in thirty-seconds of an inch and then two more numbers (represented...

These gimp pins (small brass nails) are the flat head type.

Stainless steel. Plated steel also available (please enquire).

Avdel 3201 / AGS2105 Pip Pins are now hard to obtain and the price has often become prohibitive. These French pip pins are made in the same Imperial measurements and look identical, they are manufactured...

Pins are ordered by the part number SP4Y followed by a letter to denote the diameter and then a suffix to denote the length in inches from under the head to the start of the split pin hole. For example:...

These pins are ordered by the part number SP90 followed by a letter to denote the diameter and a number to denote the length in eighths of an inch. For example: SP90-C8 is 1/16” diameter with a...

These close tolerance pins are ordered by the part number SP113 followed by a letter from the chart below to denote a size and then a number to denote the length from under the head to the start of the...

These collars are manufactured in light alloy and dyed blue. The height is 0.22” in sizes A to E inclusive and 0.25” in size G.

Contains a range of diameters from sizes B to H and contains over 100 pins in all. Ideal for the aircraft toolbox.

Pins are ordered by the part number followed by a letter to denote the diameter at the small end and then a number to denote the length in eighths of an inch. For example: SP29/H12 is a stainless steel...