Air driven to quickly apply caulking compounds, adhesives and sealants. Features a variable speed trigger to precisely control the rate of flow. The cast metal and steel construction of this tool makes...

All metal construction for sizing American “AN” bolts up to 5/8” diameter and 5” in length.

This dispenser fills and bleeds brakes in only one operation. Lightweight, easy to use (comes complete with universal adaptor A225 to fit all aircraft) requires ATS1246 adaptor for Cleveland brakes.

This brake riveting tool makes it almost impossible to ruin a brake riveting job. The threaded screw action of the rivet insertion tool ensures a perfect roll on brake rivets every time without damaging...

All metal, heavy duty cable cutter, will cut stainless and galvanised control cables with a maximum diameter of 3/16”. Also suitable for cutting electrical cables.

Quickly and accurately measures standard cable diameters in the following sizes: 1/16”, 3/32”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16” and 3/8”. Metric...

This small, precision tensionmeter will fit through inspection holes so that cables can be checked with the minimum amount of disturbance.

Unique 4 in 1 valve stem repair tool that removes cores, rethreads inside of stem, extracts damaged core, rethreads outer part of stem.

Set of 4 quality wrenches in the following sizes 9/16”, 1/2”, 5/8”, and 3/4”. All have a 1/2” drive end and overall length is 13-1/2”

Small 6” hand de-burring tool.

This master riveting kit contains everything needed to build and maintain all metal aircraft. This kit is highly recommended for the professional mechanic or the experienced home builder.

Comes complete with on/off safety valve to eliminate hose pressure when disconnecting unit from the cylinder. Can be used to check for damaged inlet or exhaust valves, cracked or worn rings and defective...

Small dimpling sets that can be operated by a pop rivet type tool, available in sizes: 3/32” and 1/8”. Also available already mounted in mole grip type pliers.

Locks to work with powerful non-slip grip, eliminates tiresome hand gripping (based on the famous “mole grips”). Ideal for holding templates or riveting work, welding etc., throat depth 3/4”.

This kit contains 2EM pressure tester, LED52 magneto synchroniser, Eastern E25 timing indicator, Eastern E5 cable tester and tool box. Everything you need to check engine compression, synchronize magnetos,...

A precision tool that will allow you to remove broken studs, retap and replace them accurately to the original dimensions. In most cases this can be accomplished without removing the cylinder. Works on...

37 degree American flaring tool, flares and burnishes sizes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4”.

The handiest gadget you will ever need, designed to fit most domestic vacuum cleaners, With this adaptor you can get into all those little places!

This fine precision tool will, if you take reasonable care and follow the simple instructions, give years of professional results. A florian pinker never needs sharpening, there is a pressure regulating...

To determine the proper grip rivet to use, measure the material thickness with a 269C3 grip gauge as shown below. Insert the grip gauge into the prepared hole, draw gauge back until lip contacts back...

New 5 blade style, crimps more evenly up to 22 swg, throat depth is 1-1/4”.

This hand operated tool cuts sheet metal like a punch and die. Ideal for templates, shims, radio chassis, air ducts and plastic sheets. It is easy to cut round, square or irregular holes to any shape,...

Each Hawkeye Borescope Kit includes the borescope, a sideways 90° mirror, a mini Maglite torch and cleaning kit. It comes complete in a black plastic reinforced case. Hawkeye precision Borescopes...

This tool cuts sheet metal, brass, copper, soft steel, aluminium, plastic, wood, and composite materials. With a capacity from 1” to 6” (25 - 140mm) diameter the Heavy Duty Circle Cutter has...

Heli-Coil serrated aviation inserts are the only FAA approved method of repairing damaged spark plug threads, also the only method certified by Continental and Lycoming. Kits contain everything you need,...

Gives a fast, accurate test of high voltage aircraft ignition cables. Simply connect the three wires, push test button and test is completed, both good and defective cables are indicated in the test window....

A precision template for locating and drilling screw mounting holes after instrument holes have been cut in the panel, does both 2-1/4” and 3-1/8” sizes.

This brilliant new innovation brings high tech to the task of timing aircraft engines. Simply mount on the ring gear at the timing mark for Lycoming engines or use the special adaptor for Continental...

Since its introduction in the mid 1980’s the Autoscope has been the choice borescope inspection tool of aircraft engine manufacturers Teledyne Continental and Textron-Lycoming. It’s an easy...

Unit has the following features: Lighted 1” x 2” mirror Light floods inspection area Thumb control gives 90 degree mirror adjustment The Steelman inspector aids inspection and more importantly...

Type 1 : Automatic plier type that can cut, grip and twist all in the one tool. Type 2 : Simple screwdriver type tool that can reach into those difficult spots Type 3 : Power-twist adaptor for fitting...

A simple device which holds the drive shaft of the magneto rigid. Adjust points on bench - then install on engine without further adjustment. Fits all Bendix magnetos.

Designed specifically for internal timing of aircraft magnetos and for synchronising magnetos to aircraft engines. Eliminates all guesswork and provides a greater safety factor by creating perfect timing...

A fine quality tool for testing fabric covered aircraft to see if they meet minimum approved standards without having to punch holes or remove the fabric. Also used to test struts for internal corrosion...

This kit is ideally suited for the A&P mechanic starting out in the field. It contains all the tools needed to perform the most commonly encountered sheet metal repair jobs.

Designed for use in tight corners where other cutters will not fit. Only requires 1-1/4” swing radius, perfect for instrument panels. Will cut tube from 1/8” to 5/8” o.d.

Will handle all retractable gear aircraft up to 8000 lbs, includes 3 A5 jacks W/ AT-1 slide tube, 2 A6 jacks W/ AT-2 slide tubes, 2 sets AJL extension legs, 1 ATS adj. tail stand, 2 AT-3 slide tubes,...

This economical cutter quickly opens any size oil filter canister for filter inspection. Simply place the filter in a vice, attach the tool to the top, and rotate about 4 or 6 turns to cleanly cut open...

The 772BMK2 kit is for servicing hydraulic and air equipment, the 772BMK6A is for nitrogen, the maximum pressure for operating is 4,500 p.s.i. The pressure gauge (not included) can be rotated through...

Develops up to 1,500 psi, operates on 50 to 150 psi shop air pressure. Safety one-shot valve allows a pump action so that strut seals are less likely to be over pressurised.

Superior to regular ring compressors in the following ways:- Low friction wrinkle band cuts friction in half so ring slides in easily. Wrinkle band can’t slip down into cylinder. Cam operated, set...

Cleans carbon from piston ring grooves, easily adjustable, blades included for five most popular piston groove sizes, 5/64”, 3/32”, 1/8”, 5/32” and 3/16”. Insert blade into...

Used for both two lug and single lug plate nuts. Will suit K1000 series anchor nuts.

Sure-Gap is designed for use on all 18mm ordinary massive electrode aircraft spark plugs. Saves time and money. Eliminates guessing of plug gap, prolongs plug life and ensures peak performance.

Accurate, versatile tool for drilling perfect right angle or variable angled holes on tubing, pipes or flat shapes. Lightweight, portable, use on any 1/4” or 3/8” air or electric drill. Adjustable...

This inspection prism kit is invaluable for inspecting windows on the aircraft where the holes or edges are hidden by aircraft skin or fairings. By positioning the kit on the window, it allows you to...

Converts your conventional hand pop riveter into an economical Riv-Nut installer tool.

Cuts rivets from 1/16” to 1/4” diameter to the exact length you require.

This accordion style spacing tool is an absolute marvel. It spaces rivet holes uniformly. Stainless steel manufacture.

10 piece kit, supplied complete with four drill bits and guides for removing 3/32”, 1/8”, 5/32” and 3/16” rivets. Easily removes rivets without damage to rivet hole or aircraft...

This self-contained sand blaster gets down to the bare metal, ideal for sand blasting rivets to remove corrosion and oxidization or other spotted areas. The abrasive is recirculated so there is no mess...

New design squeezer has a 360 degree head for greater versatility. Yoke size is 1-1/2”, overall length of unit is 21”. Squeezer bits are extra.

Economical hand installation tool capable of setting 6/32”, 8/32”, 10/32” and 10/24” Rivnuts. Kit comprises tool and a small selection of Rivnuts. Picture shows heavy duty kit...

Phenolic scraper for removing sealants and adhesives. Will slice through sealants but will not damage the structure.

The Smart Level is perfect for measuring precise angles. Each unit is accurate to within 0.2°. Digital sensor is sealed inside a weather resistant module for durability. Also available is the new...

Cleans any size plug without changing grommet, requires an air-line to operate and comes complete with two-way valve, powder and abrasive. Spare 435 gram bags of abrasive are available.

Red plastic case contains 4 sets of accurate, retractable “go” and “no go” wire gauges.

Chaser cleans threads in spark plug hole of dirt, carbon build-up and metal particles. Double ended for both 14mm and 18mm threads.

A 3/8” drive socket to fit the standard aircraft 18mm spark plug.

These bits are specially sharpened to make a clean hole in your acrylic window. They will not chip or crack the acrylic like standard drill bits. Remember that acrylic expands and contracts, so drill...

These clamps can be applied in a fraction of the time required for ordinary screw clamps and assures uniform pressure by eliminating hand tightening. Provides 70 Ibs of clamping pressure. Requires Cleco...

The only riveting kit on the market especially designed for students.

Triple head for bending 1/4”, 5/16” and 3/8” o.d. tubing in copper, aluminium, brass and steel. Multi-head design does the work of three conventional lever type benders. Calibrated markings...

Inexpensive nylon tube bender, can be mounted in a vice if necessary. Suitable for tubes with an o.d. of 3/16”, 1/4”, 5/16” and 3/8” (not recommended for 3/8” steel).

For all Teledyne Continental and Textron-Lycoming engines, adjustable type will work on all series. Ring installs on rockers and “C” collar compresses spring to allow keeper removal.

Wonder-Gun is a two-in-one tool that is both an air operated vacuum cleaner, as well as a blow gun. It connects directly to your air line and can be used for a wide range of cleaning jobs. Made of die...

The special “zero-flute” design is a single hole with a slight relief drilled through the head of the cutter, which makes this countersink virtually chatter free. And since it has no flutes...